What’s the difference between the Burris Tac30 and MTAC ?
I wanted to find out, so I bought both rifle scopes and hand-tested everything:
- Reticle
- Durability
- Field of view
- And so much more
By the end of this Burris Tac30 vs. MTAC comparison review, you’ll know which LPVO is best for you.
Let’s get started!
Quick Comparison Table
| Features | Burris Tac30 | MTAC |
|---|---|---|
| MOA | 130 | 130 |
| Magnification | 1-4x | 1-4x |
| Eye relief | 3.5-4.0 in. | 3.5-4.0 in. |
| Reticle type | Ballistic CQ | Ballistic CQ or Ballistic AR |
| Illuminated? | Yes | Yes |
| Weight | 17.0 oz. | 14.5 oz |
| Length | 11.3 in. | 11.3 in. |
Burris Tac30 vs. MTAC Review
I’ve reviewed several different Burris scopes in the past, such as the 322 and the 536. I’ve even compared them, along with other Burris products like the Fastfire 3. Today, however, we’re comparing the Burris Tac30 and the MTAC. The Burris Tac30 and the MTAC 2-7×32 are both compact riflescopes with low magnification. They’re designed for hunters, varmint shooters, and target shooters who need an optic that’s versatile enough to be used in a variety of close or long-distance engagements. Both scopes offer the same magnifications (2-7x), but they differ in size (5.7″ long vs. 6.87″) and price ($369 vs. $299).
Glass Clarity & Reticle
Both precision riflescopes are known for their quality. The MTAC is also known for its attention to detail. For example, the reticle of the MTAC 2-7×32 has a matte finish that reduces glare and makes it easier to see even in very bright conditions. The Burris Tac30’s reticle is coated with a silver finish, making it harder to see in low-light situations or when viewing targets at longer distances.
The Burris Tac30 and the MTAC 2-7×32 are made of low recoil, glass-etched BDC scopes with illumination features that are both range-adjustable and programmable. The Burris Tac30 is more customizable than the MTAC 2-7×32, with five illumination settings (including off) and four reticle patterns (including off), while the MTAC has one illumination setting (on) and one reticle pattern (on). Both scopes offer mildot reticles.
Eye Relief & Eye Box
The eye relief on both scopes is optimal for most users. The MTAC 2-7×32 features an extremely short eye relief combined with a generous eye box. Subjects in the middle of the field can be seen very clearly, while the sides of the scope are blurry in comparison. The Burris Tac30, on the other hand, has generous eye relief (5mm), which allows shooters to see much more of their target in their scope.
The Burris Tac30 has the same eye relief as the MTAC 2-7×32, but it’s slightly sharper. However, they both have larger eye boxes that are tailored for long-range shooting. The Burris Tac30’s 6mm eye relief is the same as the 6mm/2.5x scope, while the MTAC 2-7×32’s 6mm is slightly less than the 6mm/2.5x scope. The width of both scopes at 1 o’clock is 14.53mm for both scopes; this measurement considers the size of their lenses and their eyepieces, which are 5.35mm thick, while the width of an 11″ target at 1 o’clock would be 14.3 mm (1/4″).
Field of View & Clarity
The Burris Tac30’s bonus – 6x magnification that makes it great for long or extreme distance shots – attracts many hunters and varmint shooters who prefer to hold onto their rifle when taking shots at birds or coyotes at longer distances. Both precision rifle scopes are great for hunting since they provide excellent light transmission.
The Burris Tac30 has a field of view that’s wider than the MTAC 2-7×32. The Burris Tac30 features a 32mm exit pupil with a 34mm objective lens, resulting in an impressive field of view of 97 degrees at all magnifications. The MTAC 2-7×32 has a 30mm exit pupil and a 32mm objective lens, resulting in a narrower field of view of 94 degrees at all magnifications. The Burris Tac30 is better for wide-open spaces, but the MTAC would be more useful where you might have to fire quickly instead of moving your head to see more.
Durability
Both top-rated riflescopes are well-crafted and can take a beating, but the MTAC is more durable than the Burris Tac30. For example, the precision riflescope is waterproof, shockproof, and fog proof. It can resist drops of 10 feet or less onto concrete. And while you may not want to take your MTAC through intense combat situations, it’s the kind of scope that could be dropped onto concrete from waist level while hunting deer. It will still work just fine after being dropped without being damaged in any way.
The MTAC is also protected from dust, sand, dirt, and water. Its eyepiece is completely sealed from dust. The Burris Tac30, on the other hand, isn’t waterproof or shockproof. In addition, it’s not an objective lens that’s fully protected from dust. If you add a sunshade to the Burris Tac30 with a red filter over the ocular lens, you can shoot without complications in low-light conditions. However, it cannot be used underwater or in the rain.
Elevation & Windage Knobs
The MTAC 2-7×32 features an elevation knob that’s easy to use, but the hash marks are small. It can be challenging to use in some situations because it can be tough to find the exact spot you want your bullet’s impact point to be. The MTAC is also more limited in this area because it doesn’t offer windage adjustments. On the other hand, the Burris Tac30 offers both initial adjustments and reticle color changes.
The Burris Tac30’s elevation knob can be rotated to adjust .1 mil per turn, although it’s not very easy to use because the marks are smaller than the ones on the MTAC. The Burris Tac30 is better for long-range shooting since it allows shooters to adjust for windage and elevation.
Parallax & Magnification
The Burris Tac30’s 6x magnification makes it great for long shots, but it can also make it tough to keep your target in your field of vision. For example, if you’re trying to shoot a mark in the middle of the field while you’re holding your weapon in an awkward position, you may see part of your target in the scope and part of it outside the scope. The tactical riflescope also has a lot more parallax than other scopes because of its 6x magnification.
The MTAC 2-7×32 offers excellent parallax adjustment that keeps close objects clear while making far things appear blurry. It makes it easy to aim at targets that are far away.
Mounting
The MTAC 2-7×32 has more mounting options than the Burris Tac30. However, both scopes can be used with a Weaver/Picatinny mount. For example, it can be used on AR platforms with MIL-STD 1913 rail and Weaver/Picatinny mountings. It also comes with one geared 1″ base. This allows the MTAC 2-7×32 to sit directly on your Picatinny rail system with no need for an additional adapter.
Mounting it directly to your AR-15 is very beneficial because it helps eliminate the need to use a scope base since this adapter is included with your rifle. The MTAC 2-7×32 accepts Picatinny rail mounts, so you can easily mount your scope on ARs and other models with Picatinny rails. The Burris Tac30 has three non-movable mounts, so it cannot be used with ARs or other models that come with Picatinny rails. However, the Burris Tac30 is compatible with many scope mounts that are threaded for Picatinny rail systems.
Price
The Burris Tac30 delivers excellent value for its price. It’s well-built, has plenty of features, and is versatile enough for many situations.
- Fullfield II Tac30 LRS 30mm tube variable power 3x-9x-40mm matte black ballistic plex illuminated digital dimmer switch
- 1-piece tube construction, reinforced quad-seal gas seals and Hi-Lume Multi-coated lenses
- Water, fog and shockproof
The MTAC 2-7×32 is also very affordable when compared to other scopes in its category. It’s also one of the most affordable riflescopes in the 2-7x32mm range.
- Covered under warranty for life
- Made using the highest quality materials
- Tested for complete quality and reliability
The Burris Tac30 costs approximately $300 more than the MTAC 2-7×32.
Burris Tac30 vs. MTAC: Which Rifle Scope is Better?
In general, the Burris Tac30 is a great scope that can be used for long or close-range shots. It’s exceptionally durable and is compact enough to be carried as a hunting rifle scope. The MTAC 2-7×32 is also a very popular model of scope by Burris. It’s more affordable than the Burris Tac30 and offers excellent value. Both scopes outperform most advanced riflescopes, but the Burris Tac30 does so at a lower price point than the MTAC 2-7×32.
If you need to save money or don’t plan to use your scope for close-range shots, the Burris Tac30 is a good option.
- Fullfield II Tac30 LRS 30mm tube variable power 3x-9x-40mm matte black ballistic plex illuminated digital dimmer switch
- 1-piece tube construction, reinforced quad-seal gas seals and Hi-Lume Multi-coated lenses
- Water, fog and shockproof
If you want to make adjustments quickly and easily, both in daylight conditions and at night, the MTAC 2-7×32 is a great choice. It’s also more popular than the Burris Tac30, so there’s a higher chance that you’ll be able to find this scope and customize it with aftermarket accessories.
Now I’d like to hear from you. Which scope do you prefer: the Burris Tac30 or MTAC? Let me know in the comments down below. Also, check out my Bushnell LPVO review.