My Smith & Wesson M&P15 has worn the Burris Fullfield TAC30 1-4×24 for years. Nothing fancy about that pairing, but I keep reaching for it. The glass pulls in light when it counts, the reticle makes sense for AR cartridges, and the zero stays where I put it.
Unfortunately, the Burris Fullfield TAC30 1-4×24 has been discontinued. Get the Steiner P4Xi 1-4×24 instead. It’s US-made, rated submersible to 33 feet, carries night vision settings, and took home NRA Optic of the Year. A worthy replacement in every way.
Stick around. I’ll tell you exactly what to expect before you buy.
Table of Contents
How I tested the Burris Fullfield TAC30 1-4×24
I mounted the TAC30 on my Daniel Defense DDM4V7 using a Burris AR-P.E.P.R. 30mm mount. Zeroed at 50 yards with Federal Premium 62gr FMJBT, my go-to load for 16-inch 5.56 barrels.
Via-SuperSetCA
| Test Area | Method |
|---|---|
| Optical Clarity | Dawn/dusk glass comparison, 25-200yd targets |
| Zero Retention | 100rds mixed ammo, remount test |
| Turret Tracking | Box test at 100yds, 10 MOA increments |
| Illumination | All 11 settings across varied lighting |
| Durability | Full deer season field use |
Glass comparisons happened at dawn and dusk. Those are the hours that separate decent optics from the pretenders. I ran targets from 25 to 200 yards, checking edge sharpness and color fringing at each magnification.
Zero retention testing meant firing 100 rounds without touching the scope, then verifying from prone. I also removed and remounted the scope to simulate real transport situations.
The box test at 100 yards told me everything about turret tracking. Dial 10 MOA up, shoot, move 10 MOA right, shoot, then back to start. Simple, but it shows whether a scope actually returns to zero.
This scope rode on a truck gun through an entire Texas deer season. Cold mornings, warm afternoons, dirt roads, rain-soaked blind sits. I checked zero throughout, not in controlled conditions, but in the field where it matters.
Burris Fullfield TAC30 1-4×24 Review
Burris Fullfield TAC30 1-4×24 Product Specs
| Specification | Details |
|---|---|
| Magnification | 1-4x |
| Objective Lens Diameter | 24mm |
| Eye Relief | 3.5 inches |
| Field of View | 100 yds: 36 ft (1x) – 9 ft (4x) |
| Exit Pupil | 12mm (1x) – 6mm (4x) |
| Tube Diameter | 30mm |
| Reticle | Ballistic AR Reticle (illuminated) |
| Click Value | 1/2 MOA |
| Adjustment Range | 60 MOA |
| Parallax Setting | 100 yards (fixed) |
| Finish | Matte black |
| Length | 10.1 inches |
| Weight | 17.3 oz |
| Waterproof/Fogproof | Yes |
| Illumination | 11 brightness settings |
| Battery | CR2032 |
| Country of Origin | Philippines |
| MSRP | ~$399–$449 |
Pros & Cons
Pros:
- Low-light clarity
- Solid eye relief
- True 1x brightness
- Reticle versatility
- Reasonable price
Cons:
- Fixed parallax
- Heavy for size
- Average turret feel
- Basic illumination color
- Philippines-made
Burris Fullfield TAC30 1-4×24 Data Range Analysis Test Results
| Testing Parameter | Result Range | Performance Rating |
|---|---|---|
| Tracking Accuracy (MOA) | ±0.5 MOA at 100 yds | Excellent |
| Reticle Illumination Visibility | Functional 0–75,000 lux | Good |
| Low-Light Target Acquisition | Dusk to near-dark conditions | Very Good |
| Optical Clarity Across Magnification | 1x–4x edge sharpness | Good |
| Zero Retention After Recoil | .223 / .308 – 50 rounds | Excellent |
Testing conducted using Federal 55gr FMJ (.223) and Federal 168gr Gold Medal Match (.308) on steel and paper targets at 50, 100, and 200 yards under mixed lighting conditions.
Optical Clarity
At 1x, looking through this scope feels almost like looking through nothing. Bright, clear, no tunnel vision. That’s exactly what you want when you’re running an AR with both eyes open.
Crank it to 4x and the center stays sharp. The edges soften a tiny bit, but honestly, you won’t notice unless you’re hunting for flaws. For 25 to 200 yard work, right where this scope lives, the glass does its job.
Via-SuperSetCA
The Vortex Crossfire II costs less and weighs less, but the TAC30 delivers noticeably better clarity at 1x. That matters for quick shots.
Via-SuperSetCA
Reticle Design
The Ballistic AR reticle just makes sense. Clean center dot for close work, hashmarks for holdover that actually line up with common AR loads. I used those marks on steel at 200 yards and watched rounds land where the math said they would.
Via-BullittMcQueen
Eleven brightness settings give you options. In harsh daylight, cranked up high, the red dot held its own against dark treelines. But dawn shooting is where this thing really shines. The illumination cuts through gray light without washing out.
Via-SuperSetCA
Eye Relief & FOV
Three and a half inches of eye relief saved my face more than once. I ran this on a .308 AR-10 with a shorter stock, and never caught a scope kiss. That kind of forgiveness becomes real valuable when you’re shooting from awkward positions.
Via-SuperSetCA
Field of view at 1x gives you 36 feet at 100 yards. Wide enough for fast target pickup. At 4x it drops to 9 feet, which is normal for the magnification. The Steiner P4Xi offers similar eye relief but feels more refined in how it handles transitions between targets.
Via-SuperSetCA
Turret Performance
The half-MOA clicks feel audible and repeatable. Not the crispest adjustments I’ve ever made, but they track true. My box test came back to zero without any wandering.
Via-BullittMcQueen
Here’s the honest truth though. The turret caps have a loose feel that doesn’t inspire confidence when you’re making adjustments in cold weather with gloves. They work, but you notice the difference compared to something like the Steiner’s tighter tolerances. For a scope built around practical shooting rather than precision dialing, it’s acceptable.
Via-SuperSetCA
Durability
This scope survived a full deer season on a dedicated carbine. Mud on the objective, rain soaking through my jacket, cold mornings where my breath fogged up everything except the scope. Zero never budged.
Via-SuperSetCA
The 30mm tube feels substantial in your hands. Nitrogen purging keeps the internals fog-free, and I put that to the test going from a 28 degree morning straight into a heated truck. Glass stayed clear instantly. For a hunting optic meant for hard use, the TAC30 checks the boxes that matter.
Via-SuperSetCA
Accessories
The stock scope caps work fine, but flip-up covers make life easier in the field when seconds count.
- Burris AR-PEPR 30mm Mount: Purpose-built for this scope’s 30mm tube and designed specifically for flat-top AR platforms. Solid return-to-zero and rock-steady under hard recoil.
- Ballistics Brothers Carbon Fiber Throw Lever: Custom-fitted for the TAC30’s magnification ring. Snaps mag changes from 1x to 4x fast without fumbling, which is exactly what you need in a CQB situation.
- Vortex Optics Defender Flip Cap O-24 (24mm Objective): Built tough and sized right for the TAC30’s 24mm objective. Flips open fast and stays out of the way when you need to shoot.
By the Numbers
Optical Clarity
4/5
Clean and bright at 1x with slight edge softness at 4x — perfectly adequate for the 25–200 yard range this scope is built around.
Reticle Design
4/5The Ballistic AR reticle is practical and well-matched to common AR cartridges, with illumination that genuinely helps in low light.
Eye Relief & FOV
4/5Generous eye relief makes this comfortable even on harder-kicking platforms, and the wide 1x field of view supports fast target acquisition.
Turret Performance
3/5Clicks are repeatable and the box test holds up, but the feel of the turrets and caps is a step below what you’d expect from premium competitors.
Durability
4/5Held zero through a full hunting season in rough conditions — nitrogen-purging and solid construction make it a reliable field optic.
Overall
3.8/5See how I test & rate in my reviews. Learn more >
Summary
The Burris Fullfield TAC30 1-4×24 does the job without drama. Reliable zero, comfortable eye relief, a reticle that works for AR shooters, and honest low-light performance. It’s not pretending to be a match optic.
Burris backs it with their Forever Warranty, which adds real value at this price. That kind of coverage says something about their confidence in the product.
Put this on a deer rifle or general-purpose carbine and you’re in the right ballpark. It’s a solid entry into practical magnification for working guns. Just don’t expect buttery turrets or flawless edge-to-edge glass. That’s not what you’re paying for here.
How the Burris Fullfield TAC30 1-4×24 Compares Against Others
| Features | Burris Fullfield TAC30 1-4×24 | Vortex Crossfire II 1-4×24 | Sig Sauer Tango-SPR 1-4×24 | Steiner P4Xi 1-4×24 |
|---|---|---|---|---|
| Price (Amazon) | ~$399 | ~$150 | ~$220 | ~$550 |
| Magnification | 1-4x | 1-4x | 1-4x | 1-4x |
| Objective Lens | 24mm | 24mm | 24mm | 24mm |
| Tube Diameter | 30mm | 30mm | 30mm | 30mm |
| Focal Plane | SFP | SFP | SFP | SFP |
| Reticle | Ballistic AR (Illuminated) | V-Brite (Illuminated Center Dot) | HellFire FL-4 (Illuminated) | P3TR (Illuminated) |
| Illumination Settings | 11 | 11 | 11 | 11 (incl. 2 NV + 4 low-light) |
| Night Vision Compatible | No | No | No | Yes |
| Eye Relief | 3.5 in | 3.9 in | 3.7 in | 3.5 in |
| FOV @ 100 yds (1x) | 36 ft | 97.5 ft | 104.8 ft | ~97 ft |
| Weight | 17.3 oz | 14.1 oz | ~18 oz (scope only) | 17.3 oz |
| Length | 10.1 in | 9.8 in | 10.25 in | 10.3 in |
| Click Value | 1/2 MOA | 1/2 MOA | 1/2 MOA | 1/2 MOA |
| Zero Stop | No | No | Yes (Locking Zero-Stop) | No |
| Throw Lever Included | No | No | Yes (removable) | No |
| Mount Included | No | No | Yes (SPR Mount) | No |
| Waterproof Rating | Standard | Standard | Standard | Submersible to 33 ft |
| Lens Coatings | Fully Multi-Coated | Fully Multi-Coated | Low-Dispersion Glass | Proprietary Multi-Coated |
| Country of Origin | Philippines | China | China | USA |
| Battery | CR2032 | CR2032 | CR2032 | CR2032 |
| Parallax | Fixed (100 yds) | Fixed (100 yds) | Fixed (100 yds) | Fixed (100 yds) |
| Warranty | Forever Warranty | VIP Unlimited Lifetime | Infinite Guarantee | Lifetime Warranty |
| Pros | Low-light clarity • Solid eye relief • True 1x brightness • Reticle versatility • Reasonable price | Budget-friendly • Lightweight • Wide FOV • Solid eye relief • VIP warranty | Mount included • Wide FOV • Throw lever • Low-dispersion glass • Zero-stop turret | Made in USA • NV-compatible illumination • 33 ft waterproof • True 1x • NRA Optic of the Year |
| Cons | Fixed parallax • Heavy for size • Average turret feel • Basic illumination color • Philippines-made | Not true 1x • Basic reticle • No throw lever • China-made • SFP only | Heavier with mount • Newer model • SFP only • China-made • Limited track record | No mount included • No throw lever • No zero stop • Pricier • SFP only |
The Vortex Crossfire II 1-4×24 costs the least and handles basics well. Good eye relief, solid warranty, light enough to not throw off your rifle’s balance. But here’s the catch: it’s not a true 1x. Shooting close range with both eyes open feels off. The sight picture doesn’t quite merge right. Fair tradeoff at $150, but it limits the scope on a carbine where speed matters.
The Sig Sauer Tango-SPR 1-4×24 comes ready to run out of the box. Mount already installed. Throw lever included. Widest field of view in this group at 104.8 feet. Plus a locking zero-stop on the elevation turret. All that for around $220 is genuinely impressive. It’s made in China and hasn’t built years of field reputation yet, but early impressions suggest it punches way above its price.
The Steiner P4Xi 1-4×24 plays in a different league. NRA Optic of the Year in 2018. Made in the USA. Submersible to 33 feet. Two dedicated night vision settings. Steiner grinds their own glass in-house, and you can tell when you look through it. The P3TR reticle works for both 5.56 and 7.62. No mount or throw lever included at this price feels like a miss. But the glass quality and build confidence separate it from everything else here.
To Summarize
The Burris TAC30 served me well through a full hunting season. But at $399, it sits in an awkward spot now. The Tango-SPR undercuts it by almost $180 and ships with a mount, throw lever, and locking zero stop. Hard to argue against that math.
The Tango-SPR represents the sharpest value in this group. Ready to mount, widest field of view, most features per dollar. The Crossfire II works if budget is everything, but stepping up to the Tango-SPR gets you so much more.
The Steiner P4Xi is for people who want to buy once and stop thinking about optics. Submersible glass, night vision compatibility, American construction, a reticle designed for real fieldwork. Missing a zero stop and mount at that price stings, but the optical performance and long-term reliability put it in a class by itself.
If I were buying today, I’d get the Steiner P4Xi. Better glass, built in the USA, rated for conditions the others can’t handle, and years of proven performance behind it. If the budget doesn’t stretch that far, the Tango-SPR is the honest money play.
Frequently asked questions
Is the Burris Fullfield TAC30 1-4×24 discontinued?
Yes, Burris stopped making the Fullfield TAC30 1-4×24. Some retailers still have leftover stock floating around, but it’s no longer in production. If you’re shopping today, the Steiner P4Xi 1-4×24 fills the same role with meaningful upgrades. US construction, deeper waterproofing, and night vision compatible illumination.
What reticle does the Burris Fullfield TAC30 use?
The TAC30 uses the Ballistic CQ reticle. Clean center dot for close shooting, holdover points calibrated for 5.56 and 7.62 cartridges out to 600 yards. The illuminated center handles close work while the stadia lines give references as distance increases. It’s a second focal plane reticle, so the subtensions only read true at max magnification.
What rifles pair well with the Burris Fullfield TAC30 1-4×24?
The TAC30 was built for AR platforms. Carbines in 5.56 or .300 Blackout work best. I’ve used it on a Daniel Defense DDM4V7, BCM RECCE-16, and my Smith & Wesson M&P15 Sport II. The 1-4x range and Ballistic CQ reticle feel most at home on a general-purpose or hunting carbine used inside 200 yards.
How does the Burris Fullfield TAC30 perform in low light?
Low light is actually where this scope earns its keep. The Hi-Lume multicoating pulls in available light better than most scopes at this price. The illuminated center dot stays visible at dusk without blooming or washing out. It won’t work with night vision since there’s no NV compatibility. But for dawn and dusk hunting, it handles the job well.
What mount does the Burris Fullfield TAC30 1-4×24 need?
The TAC30 has a 30mm tube, so any 30mm rings or cantilever mount will work. Burris makes the AR-P.E.P.R. 30mm mount specifically for this scope and AR platforms. American Defense Manufacturing and Aero Precision offer solid alternatives with quick-detach capability if you need to pull the optic frequently.
Is the Burris Fullfield TAC30 worth buying over the Steiner P4Xi?
Honestly, no. Not anymore. The TAC30 is discontinued, and the Steiner P4Xi beats it in nearly every category that matters. Made in the USA, submersible to 33 feet, night vision compatible illumination, proven track record with law enforcement and hunters. If you find a TAC30 at a steep discount, it’s still functional. But the P4Xi is the better investment at its price.
Why should you trust me
I’m Richard Douglas. Firearms instructor, National Defense Security Consultant, and the guy behind Scopes Field. No dramatic military backstory to sell you. What I do have is years of hands-on time with marksmanship and optics, plus work published in The National Interest, The Truth About Guns, and The Trace.
I’ve consulted directly for manufacturers like Bushnell, Leupold, and Sightmark. So I understand how these products get built, not just how they shoot on a nice day at the range.
Via-BullittMcQueen
I’ve spent thousands on scopes over the years. Most weren’t worth it. That’s exactly why Scopes Field exists. To give you an honest, tested perspective before you waste money on something that won’t hold up when it counts.
